Introduction to the manual 23
Introduction to the manual
Contents of this chapter
This chapter describes the intended audience and contents of the manual. It contains a
flowchart of steps in checking the delivery, installing and commissioning the drive. The
flowchart refers to chapters/sections in this manual and other manuals.
Target audience
This manual is intended for persons who
• plan the cabinet assembly of the drive module and install the module into a user-
defined cabinet
• plan the electrical installation of the drive cabinet
• make instructions for the end user of the drive concerning the mechanical installation
of the drive cabinet, connection of power and control cables to the cabinet-installed
drive and maintenance of the drive.
Read the manual before working on the drive. You are expected to know the fundamentals
of electricity, wiring, electrical components and electrical schematic symbols.
The manual is written for readers worldwide. Both SI and imperial units are shown.
Categorization by frame size and option code
The instructions, technical data and dimension drawings which concern only certain drive
frame sizes are marked with the symbol of the frame size (R10 or R11). The frame size is
marked on the type designation label.
The instructions and technical data which concern only certain optional selections are
marked with option codes, eg, +J410. The options included in the drive can be identified
To Next Page
Loading...
Need help?
General