6 - 11
HEAT EXCHANGER
HEAT EXCHANGER INSTALLATION
Install:
Proceed to install the distributor following the removal steps in
reverse order.
• the special screw (7) to the following torque:
T
.
R
.
Torque 60 N*m
• the distributor cap to the following torque:
T
.
R
.
Torque 25 N*m
NOTE:________________________________
If not worn, re-use the previously removed bands; other-
wise, fi t new ones.
NOTE:________________________________
Fill with coolant after completing these operations.
A
C
COPY - Moto GB - Grant Martland - grantmartland@motogb.co.uk
To Next Page
Loading...
Need help?
General
