ELE. - 23
SIDE STAND SWITCH
G
A
It is situated near the supporting plate of the side stand (A), Fig.
G.
If the gear is engaged and the stand is open, and therefore the
circuit is open, the ECU prevents starting or shuts off the engine
(if rotating).
Check:
• The continuity using the multitester.
STAND PIN 1 PIN 2
Raised
• •
Lowered
• •
NOTE:________________________________
When the above conditions are fulîš¿lled, the sensor is work-
ing, otherwise replace the part.
SENSORS
COPY - Moto GB - Grant Martland - grantmartland@motogb.co.uk
To Next Page
Loading...
Need help?
General
