Mitsubishi FX3UC Series User Manual

17
Requirement for Compliance with LVD directive
The following products have shown compliance through direct testing (of the identified standards below) and
design analysis (through the creation of a technical construction file) to the European Directive for Low
Voltage (73/23/EEC) when used as directed by the appropriate documentation.
Type : Programmable Controller (Open Type Equipment)
Models : MELSEC FX
2NC series manufactured
*1. Compliance to BSEN61010-1 is claimed through virtue of direct compliance to IEC1010-1 and
Amendment 1.
Models : MELSEC FX
2N series manufactured
For the products above, PLCs manufactured
before March 31st, 2002 are compliant with IEC1010-1
from April 1st, 2002 to April 30th, 2006 are compliant with EN61131-2:1994+A11:1996+A12:2000
after May 1st, 2006 are compliant with EN61131-2:2003
from August 1st, 1999 FX2NC-16EYR-T-DS
from October 1st, 2007 FX
2NC-16EYR-T
Standard Remark
IEC1010-1:1990 Safety requirements for electrical
/A1:1992 equipment for measurement,
control, and laboratory use
- General requirements
BSEN61010-1 :1993
*1
The equipment has been assessed as a component for
fitting in a suitable enclosure which meets the requirements
of IEC 1010-1:1990+A1:1992
from July 1st, 1997 FX
2N-16EYR-ES/UL
from August 1st, 2005 FX
2N-8ER-ES/UL FX2N-8EYR-ES/UL
Standard Remark
IEC1010-1:1990 Safety requirements for electrical
/A1:1992 equipment for measurement, control,
and laboratory use
- General requirements
The equipment has been assessed as a component for
fitting in a suitable enclosure which meets the requirements
of IEC 1010-1:1990+A1:1992
EN61131-2:1994 Programmable controllers
/A12:1996 - Equipment requirements and tests
/A11:2000
The equipment has been assessed as a component for
fitting in a suitable enclosure which meets the requirements
of EN61131-2:1994+A11:1996+A12:2000
EN61131-2:2003 Programmable controllers
- Equipment requirements and tests
The equipment has been assessed as a component for
fitting in a suitable enclosure which meets the requirements
of EN61131-2:2003

Mitsubishi FX3UC Series Specifications

General

Brand	Mitsubishi
Model	FX3UC Series
Category	Controller
Language	English