Mitsubishi FX3UC Series User Manual

326
FX3UC Series Programmable Controllers
User’s Manual - Hardware Edition
10 Display Module (Only FX3UC-32MT-LT)
10.5 Monitor/Test Mode [Excluding User-Registered Devices]
10.5.3 Monitor screen & status display
→ Refer to Section 10.18 for the procedure used to display the current values as hexadecimal values.
1. Data register [D (16-bit)]/extended register [R (16-bit)]/extended file register [ER (16-bit)]
2. Data register [DD (32-bit)]/extended register [DR (32-bit)]/extended file register [DER (32-bit)]
File register (D):
The file register (D) current value cannot be directly monitored at the
display module.
3. Timer (T)
Display Content
[1]
Device No.
[2]
Current value
Display Content
[1]
Device No.
[Upper 16-bit device No. (odd number)]
[Lower 16-bit device No. (even number)]
[2]
Current value
Display Content
[1]
Device No.
[2]
Contact image
ON: 
OFF: Blank
[3]
Reset image
ON: 
OFF: Blank
[4]
Current value
[5]
Setting value or device specified by setting value (if an index
modifier is present, the index register’s device is also displayed).
[6]
Current value of device specified by setting value.
D0 0
D1 0
D2 0
D3 0
[2]
[1]
D1
0
D3
0
[2]
[1]
2
0D
D
0
[1]
0
R
T0 P
001
0
R
T1 P
0
D
0001
[2]
[3]
[2] [3]
[4]
[5]
[4]
[5]
[6]

Mitsubishi FX3UC Series Specifications

General

Brand	Mitsubishi
Model	FX3UC Series
Category	Controller
Language	English