112 Rockwell Automation Publication 2711P-UM008I-EN-P - February 2022
Chapter 3
Change the Current Date on Terminal
To adjust the date on the terminal, follow these steps.
1. Select Terminal Settings, then choose Time/Date/Regional
Settings>Date.
2. To change the current values above the button, press Year, Month, and
Day:
• Year is four digits in the range 1980…2099
• Month is in the range 1…12
• Day is in the range 1…31 and validated by month
3. Press OK when done.
Change the Current Time on Terminal
To adjust the time on the terminal, follow these steps.
1. Select Terminal Settings, then choose Time/Date/Regional
Settings>Time.
2. To change the current values, press Hour, Minute, and Seconds:
• Hour range is 0…23 (24-hour format)
• Minute and second range is 0…59
3. Press OK when done.
To Next Page
Loading...
Need help?
General
