Rockwell Automation Publication 2711P-UM008I-EN-P - February 2022 23
Chapter 1
Accessories
Tab l e 6…Tab l e 1 0 list accessories for the PanelView Plus 7 Performance
terminals.
For a list of accessories that are available for the ArmorView Plus 7 terminal, see
the Visualization Solutions Selection Guide, publication VIEW-SG001
.
Table 6 - Protective Overlays
Cat. No.
(1)
(1) The use of protective overlays may not be compatible in all hygienic applications. Consult the standards and
protocols for your hygienic applications before you use a protective overlay on a stainless steel terminal.
Display Size Operator Input Quantity
Touch Key and Touch
2711P-RGT7SP
6.5-in.
•
3
2711P-RGB7P •
2711P-RGT9SP 9-in. (wide) •
2711P-RGT10SP
10.4-in.
•
2711P-RGB10P •
2711P-RGT12SP 12.1-in. (wide) •
2711P-RGT15SP
15-in.
•
2711P-RGB15P •
2711P-RGT19P 19-in. •
Table 7 - Power Supplies and Power Terminal Blocks
Cat. No. Description Quantity
1606-XLP95E DIN rail power supply, 24…28V DC output voltage, 95 W 1
1606-XLP100E DIN rail power supply, 24…28V DC output voltage, 100 W 1
2711P-RSACDIN DIN rail power supply, AC-to-DC, 85…265V AC, 47…63 Hz 1
2711P-RTBAP 3-pin AC power terminal block (gray with black labels for L1, L2N, and 10
2711P-RTBDSP 3-pin DC power terminal block (black with white labels for +, –, and GND) 10
Table 8 - Mounting Hardware
Cat. No. Description Quantity
2711P-RMCP
(1)
(1) Catalog number 2711P-RMCP mounting levers are used with PanelView Plus 7 Performance terminals. Do not use gray
mounting levers; they are not compatible with PanelView Plus 7 Performance terminals.
Mounting levers (black) 16
2711P-RTMC
(2)
(2) Catalog number 2711P-RTMC mounting clips are used for stainless steel terminals, catalog numbers 2711P-T9W22D9P-BSHK, or
2711P-T12W22D9P-BSHK. Catalog number 2711P-T12W22D9P-BSHK requires 10 mounting clips. If you need more than eight
clips, order two 2711P-RTMC mounting clip kits.
Mounting clips 8
To Next Page
Loading...
Need help?
General
