154 Rockwell Automation Publication 2711P-UM008I-EN-P - February 2022
Chapter 4
Boot Option
The boot options provide a way for you to enter Safe mode at startup.
Configure the Ethernet Ports
The ‘Network (On-board Embedded Ethernet Switch - DLR)’ provides
options to configure the on-board Ethernet switch of the terminal for the
network topology. You can also configure the Ethernet ports from the terminal
menus. See Configure the Ethernet Ports
on page 90.
After changing the selections, restart the terminal.
Shell Startup Options Description
Type Launches the terminal as an open or closed system at startup:
• (Open system) – launches the Windows CE desktop on startup.
• (Closed system) (default) – launches FactoryTalk View ME Station
Configuration mode on startup.
You can also allow or restrict desktop access within FactoryTalk View ME
Station Configuration mode by pressing Terminal Settings>Desktop Access
Setup. See Windows CE Desktop Access — Series A Terminals on page 79.
User Interface Button Controls Sets the visual appearance of control buttons at startup:
• Windows XP Style (default)
• Windows 95 Style
Safe Mode Options Description
Do not detect Safe mode
request at startup
Disables Safe mode detection during startup (default).
Detect Safe mode request at
startup
Displays a small white box in the lower left corner of the terminal display during
startup. Press and hold the white box to enter Safe mode. Safe mode lets you
bypass a loaded FactoryTalk View ME application and go directly to Configuration
mode. If you do not press the white box, the system boots up normally.
Another way to enter Safe mode is to access Maintenance mode.
See Maintenance Mode Operations — Series A Terminals on page 224.
Port (Link) Configuration Description
Port 1 (Link 1) and Port 2 (Link 2) Enabled Enables Link 1 and Link 2 Ethernet connections for DLR
configuration.
Port 1 (Link 1) Only Enabled Enables Link 1 Ethernet connection for star or linear configuration.
Port 2 (Link 2) Only Enabled Enables Link 2 Ethernet connection for star or linear configuration.
To Next Page
Loading...
Need help?
General
