4F-17 Electronic Stability Program:
Fail-Safe Table
S5JB0E4604023
When any of the following DTC(s) is detected, ESP® system is in fail-safe mode per its DTC and ABS, EBD and/or
TCS / stability functions are deactivated until the resolution is applied.
DTC No.
Fail-safe operation
Fail-safe condition resolutive
ABS EBD
TCS /
stability
)
C1015
X { X
When ESP® control module detects the system as normal, after
ignition switch turned OFF to ON.
)
C1016
{{{ —
)
C1017
{{ X
When ESP® control module detects the system as normal, after
ignition switch turned OFF to ON.
)
C1018
{{ X
)
C1020
{{ X
)
C1021
X*1X
When estimated vehicle speed exceeds 10 km/h (6.5 mile/h) and
detects system as normal.
)
C1025
)
C1031
)
C1035
)
C1022
X*1X
)
C1026
)
C1032
)
C1036
)
C1023
{{ X
When ESP® control module detects the system as normal, after
ignition switch turned OFF to ON.)
C1024
{{ X
)
C1027 *3
{{{ —
)
C1028
{{ X
When ESP® control module detects the system as normal, after
ignition switch turned OFF to ON.
)
C1034
*2 { X
)
C1037
{{{
)
C1038
{{ X
)
C1039
*2 {
X
)
C1040
{{ X