10B-2 Body Electrical Control System:
CAN Communication System Description
S5JB0EA201002
Refer to “CAN Communication System Description: in Section 1A” for CAN communication system description. BCM
communication control data with each control module as follows.
BCM Transmission Data
BCM Reception Data
ECM
Combination
Meter
Transmit
DATABCM
Keyless
Start
Control
Module
(if equipped)
TCM
(A/T
model)
ESP
Control
Module
(vehicle
equipped
with ESP )
A/C switch ON signal
Blower fan signal
DRL ON signal
Electric load signal
A/T mode status signal
Brake fluid level switch signal
Parking brake switch signal
Seat belt buckle switch signal
Charging system signal
Engine oil pressure switch signal
Illumination ON signal
Diagnostic trouble code (DTC)
Door switch status
Door lock status
I5JB0DA20001-01
Engine speed signal
Engine coolant temp. signal
Vehicle speed signal
Stop (brake) lamp switch signal
Magnet clutch signal
A/C refrigerant pressure signal
Distance kilometers per liter of
fuel signal
Transmission range sensor signal
(A/T select lever position)
Buzzer request signal
Door lock/unlock request signal
Ignition knob switch signal
Answer back request signal
TCM
(for A/T model)
ECM
4WD
Control
Module
(if equipped)
Keyless Start
Control Module
(if equipped)
DATABCM
Receive
I5JB0DA20002-02
To Next Page
Loading...
Need help?
General
