Tektronix DPO70000C/DX Series User Manual

About Tektronix oscilloscopes TekScope Recovery Report Utility
Running the utility
Click on the utility link
.
If TekScope is running when the utility is invoked, the utility will warn the user that TekScope must be
stopped. This is necessary to allow the utility to access some of the files. The utility will automatically
stop TekScope after it queries the serial number of the instrument. Click Yes to allow the utility to stop
TekScope and collect files for the report.
If TekScope is not running, the recovery utility will still run and will collect files for the report.
Finding the report
When the utility is finished running, the zipped report file is on the desktop.
a) In the case where TekScope was running when the utility was invoked, the name of the .zip report
file created on the desktop will contain the type of instrument and the serial number. For example:
TekScope_Recovery_Report_MSO 71254C_123456789 .zip.
b) However, if TekScope was not running when the utility was invoked, the name of the .zip report file
will not contain the serial number. For example:
TekScope_Recovery_Report_M SO71254C.zip
DSA/DPO70000D, MSO/DPO/DSA70000C, DPO7000C, and MSO/DPO5000 Series 17

Tektronix DPO70000C/DX Series Specifications

General

Brand	Tektronix
Model	DPO70000C/DX Series
Category	Test Equipment
Language	English