D-Link xStack DGS-3120 Series Reference Guide

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
221
Metric
Enter the metric value used here. The RIPng route that was learned from the interface
will add this value as a new route metric. The default value is 1. This value must be
between 1 and 15.
Click the Apply button to accept the changes made.
IP Multicast Routing Protocol (RI Mode Only)
IGMP
IGMP Interface Settings
The Internet Group Management Protocol (IGMP) can be configured on the Switch on a per-IP interface basis.
Each IP interface configured on the Switch is displayed in the below IGMP Interface Settings window.
To view the following window, click L3 Features > IP Multicast Routing Protocol > IGMP > IGMP Interface
Settings, as shown below:
Figure 5-93 IGMP Interface Settings window
Click the Edit button to re-configure the specific entry.
Click the Edit button to see the following window.

D-Link xStack DGS-3120 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3120 Series
Category	Switch
Language	English