D-Link xStack DGS-3120 Series Reference Guide

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
37
Figure 2-39 Reboot Schedule Settings window
The fields that can be configured or viewed are described below:
Parameter Description
Time Interval (1-43200)
Click the radio button and enter the interval in minute to reboot.
Time (HH:MM)
Click the radio button and enter the time to reboot.
Date (DD/MM/YYYY)
Enter the date to reboot.
Save Before Reboot
Tick the check box to save the configurations before rebooting the system.
Click the Apply button to accept the changes made.
Click the Delete button to clear all the information entered in the fields.
Turn on LEDs
This window is used to turn all the ports’ LEDs on for a specific period of time.
To view this window, click System Configuration > Turn on LEDs, as shown below:
Figure 2-40 Turn on LEDs window
The fields that can be configured or viewed are described below:
Parameter Description
LEDs State
Click to enable or disable the LEDs state. When enabled, all ports’ LEDs light solid
green.
Timeout (1-3600) Enter the time to keep the LEDs on. Tick the Infinite check box to keep the LEDs on
until the state is disabled. The default value is 300 seconds.
Click the Apply button to accept the changes made.

D-Link xStack DGS-3120 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3120 Series
Category	Switch
Language	English