xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
385
tacacs+ - Adding this parameter will require the user to be authenticated using the
TACACS protocol from a remote TACACS server.
xtacacs - Adding this parameter will require the user to be authenticated using the
XTACACS protocol from a remote XTACACS server.
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the specific entry.
Click the Delete button to an Enable Method List defined by the user.
Accounting Method Lists Settings
Here users can create and configure accounting method lists on the Switch.
To view this window, click Security > Access Authentication Control > Accounting Method Lists Settings as
shown below:
Figure 8-82 Accounting Method Lists Settings window
The fields that can be configured are described below:
Parameter Description
Enter a method list name defined by the user of up to 15 characters.
Priority 1, 2, 3, 4
The user may add one, or a combination of up to four of the following accounting
methods to this method list:
none - Adding this parameter will require no accounting.
radius - Adding this parameter will require the user to be accounted using the
RADIUS protocol from a remote RADIUS server.
tacacs+ - Adding this parameter will require the user to be accounted using the
TACACS protocol from a remote TACACS server.
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the specific entry.
Click the Delete button to an Enable Method List defined by the user.
Local Enable Password Settings
Users can configure the locally enabled password for Enable Admin. When a user chooses the "local_enable"
method to promote user level privileges to administrator privileges, he or she will be prompted to enter the
password configured here that is locally set on the Switch.
To view this window, click Security > Access Authentication Control > Local Enable Password Settings as
shown below:
To Next Page
Loading...
Need help?
General