D-Link xStack DGS-3120 Series Reference Guide

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
416
Figure 9-28 DNS Resolver Static Host Name Settings window
The fields that can be configured are described below:
Parameter Description
Host Name
Enter the name of the host.
IP Address
Click and enter the IP address of the host.
IPv6 Address
Click and enter the IPv6 address of the host.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specific entry.
DNS Resolver Dynamic Host Name Table
This window displays the current host name entries.
To view this window, click Network Application > DNS Resolver > DNS Resolver Dynamic Host Name Table as
shown below:
Figure 9-29 DNS Resolver Dynamic Host Name Table window
PPPoE Circuit ID Insertion Settings (RI and EI Mode
Only)
This window is used to configure the PPPoE circuit ID insertion function.
To view this window, click Network Application > PPPoE Circuit ID Insertion Settings as shown below:

D-Link xStack DGS-3120 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3120 Series
Category	Switch
Language	English