● Damage caused during transportation by the customer or a third party
authorized by the customer
● Storage conditions that do not meet the requirements specied in this
document
● Failure to comply with local laws, regulations, and related standards due to
the materials and tools prepared by the customer
● Damage caused by the customer's negligence or improper operations or third-
party reasons
1.1 Personal Safety
Do not work with power on during installation. Do not install or remove a cable
with power on. Transient contact between the core of the cable and the conductor
will generate electric arcs or sparks, which may cause a
re or personal injury.
Non-standard and improper operations on the energized equipment may cause
re or electric shocks, resulting in property damage, personal injury, or even death.
Before operations, remove conductive objects such as watches, bracelets, bangles,
rings, and necklaces to prevent electric shocks.
During operations, use dedicated insulated tools to prevent electric shocks or short
circuits. The insulation and voltage resistance must comply with local laws and
regulations and IEC 62477-1/-2 or GB 311.
During operations, wear personal protective equipment such as protective
clothing, insulated shoes, goggles, safety helmets, and insulated gloves.
General Requirements
● Do not stop protective devices. Pay attention to the warnings, cautions, and
related precautionary measures in this document and on the equipment.
FusionModule2000-S Smart Modular Data Center
User Manual 1 Safety Information
Issue 07 (2022-09-30) Copyright © Huawei Technologies Co., Ltd. 2
To Next Page
Loading...
Need help?
General