Table 5-49 Setting the authentication password
Path Parameter Default
Value
Setting
System
Settings >
NMS
Application
> NetEco >
Set
Authenticati
on Password
Authenticatio
n password
Modifyme
_123
Set this parameter based on
customer requirements.
NOTE
Requirements for setting passwords:
a–z, A–Z, 0–9, ~!@#^*_={}:,./?-`$ (8–32
characters that include at least three
of the following types: digits,
lowercase letters, uppercase letters,
and special characters)
Conrm
authenticatio
n password
- -
Step 4 Click Submit.
----End
5.3.14.3 Obtaining the NetEco Software License
Obtain the license from the technical support website.
● For enterprise users:
a. Log in to the technical support website at https://support.huawei.com/
enterprise.
b. Browse or search for iMaster NetEco License Application Guide, and
apply for the license of the NetEco software by referring to the guide.
● For carriers:
a. Log in to the technical support website at https://support.huawei.com.
b. Browse or search for iMaster NetEco License Application Guide, and
apply for the license of the NetEco software by referring to the guide.
5.3.14.4 Obtaining the Adapter Software Installation Packages
Obtaining the Adapter Software Installation Packages
This section describes how to obtain the adapter software installation package.
● For enterprise users:
a. Log in to the iMaster NetEco technical support website.
b. Obtain the iMaster NetEco V600R022C00XXX ReleaseDoc_EN (Data
Center).zip, DP_V600R022C00XXX_DCAdapters.zip, and
DP_V600R022C00XXX_DomainAdapters packages, decompress the
packages, and search for the adapter software installation package in the
DP_V600R022C00SPCXXX_XXAdapters and
DP_V600R022C00XXX_DomainAdapters based on the NE types and
FusionModule2000-S Smart Modular Data Center
User Manual 5 Power-On Commissioning
Issue 07 (2022-09-30) Copyright © Huawei Technologies Co., Ltd. 251
To Next Page
Loading...
Need help?
General