Step 7 Repeat steps Step 3 to Step 6 until the conguration is complete.
----End
5.3.14.9.2 Example: Adding a Smart Module
Prerequisites
You have created management domains in Planning
Conguration.
Procedure
Step 1 Log in to the NetEco client.
Step 2 On the main menu, choose Device Management > Conguration > Planning
Conguration.
Step 3 Choose the management domain where you want to add a smart module from
the navigation tree on the left.
Step 4 In the Domain area on the lower left of the page, select Modular from the drop-
down list box.
Step 5 Select the Modular to be added and drag the modular icon to the management
domain area.
Figure 5-83 Adding the smart module in the room area
Step 6 Modify Management Info of the smart module as required or retain the default
values.
Step 7 Click
on the toolbar to save the settings.
----End
Follow-up Procedure
Perform the following operations on the Planning
Conguration page as
required.
FusionModule2000-S Smart Modular Data Center
User Manual 5 Power-On Commissioning
Issue 07 (2022-09-30) Copyright © Huawei Technologies Co., Ltd. 256
To Next Page
Loading...
Need help?
General