the mobile data is Enable and the gateway address type is Domain
name.
Table 5-15 NetEco parameters
Parameter
Name
Settings
Address type Domain name.
NetEco domain
name
This parameter is set by default.
Port number 31220
Network port
for link setup
WAN_1
----End
5.3.4 Facial Recognition
5.3.4.1 Recording Facial Data
Prerequisites
The FusionModule app has been installed on the PAD.
Procedure
1. Log in to the FusionModule app on the PAD as an administrator.
2. On the main screen of the app, tap
. On the displayed Edit screen, select
Face Account Management. After reading the message, tap OK.
3. Click Add to start recording facial data.
The facial data is used only for conguring the facial recognition function and is not
used for other purposes. The facial data is encrypted during transmission in the
ECC800-Pro to ensure that the personal data of users is fully protected.
FusionModule2000-S Smart Modular Data Center
User Manual 5 Power-On Commissioning
Issue 07 (2022-09-30) Copyright © Huawei Technologies Co., Ltd. 184
To Next Page
Loading...
Need help?
General