Step 6 For details about how to commission the camera and set parameters, see the
documents delivered with the device or the documents obtained by referring to
the section "Preparing Documentation".
1. Preview the site situation in real time and check the camera coverage through
videos. Adjust the lens if necessary.
2. (Optional)
Congure an SD card if the VCN or IVS1800 is not congured.
3. Choose Settings > Video/Audio/Image > Video, and set camera Stream
type, Primary stream, and Secondary stream 1 parameters, as shown in the
following
gures.
Set the encoding protocol to H.265.
FusionModule2000-S Smart Modular Data Center
User Manual 5 Power-On Commissioning
Issue 07 (2022-09-30) Copyright © Huawei Technologies Co., Ltd. 228
To Next Page
Loading...
Need help?
General