2
Before making copies
2-52 C300
Before making copies Chapter 2
2.7 Loading paper into the bypass tray
Paper can be fed manually through the bypass tray if you wish to copy onto
paper that is not loaded into a paper tray, or if you wish to copy onto thick
paper, postcards, envelopes, OHP or labels.
To load paper (bypass tray)
1 Open the bypass tray.
– When loading large-
sized paper, pull out
the tray extension.
2 With the side to be printed on facing down, insert the paper as much
as possible into the feed slot.
3 Slide the lateral guides
to fit the size of paper
being loaded.
Tray extenstion
Lateral guides
To Next Page
Loading...
Need help?
General
