Basic copy operations
3
C300 3-45
Basic copy operations Chapter 3
Selecting a stored zoom ratio
Copy zoom ratios that have been stored can be recalled to be used when de-
sired. In addition, stored copy zoom ratios can be changed.
0 The default setting is “×1.0”.
0 Touch [+] to enlarge the zoom ratio, and touch [–] to reduce the zoom ra-
tio in × 0.001 increments.
0 Stored zoom ratios can be changed to desired zoom ratios. For details
on storing zoom ratios, refer to “Storing the desired zoom ratio” on
page 3-46.
1 In the Basic screen, touch [Zoom].
The Zoom screen appears.
2 Touch the button for the desired zoom ratio under “Set Zoom”.
3 Touch [OK].
The Basic screen appears again.
To Next Page
Loading...
Need help?
General
