Basic copy operations
3
C300 3-71
Basic copy operations Chapter 3
1 In the Basic screen, touch [Finishing].
The Finishing screen appears.
2 Touch [Sort].
– To separate each set of copies, touch [Offset].
– To specify the output tray, touch the button for the desired tray un-
der “Output Tray”.
3 Touch [OK].
The Basic screen appears again.
Separating copies by pages (“Group” setting)
0 The default setting is “Group”.
0 If “Offset” is selected while no finisher is installed, printed copies will be
fed out and sorted in an alternating crisscross pattern if the following
conditions are met.
0 8-1/2 × 11- or 5-1/2 × 8-1/2-size paper is used.
0 Paper of the same size and type is loaded with the w orientation in one
paper tray and with the v orientation in another tray.
0 The “Auto Paper Select” setting is selected.
0 The “Auto Paper Select” setting is not selected when the “Mixed Original”
setting is selected.
To Next Page
Loading...
Need help?
General
