Utility
12
C300 12-19
Utility Chapter 12
2
Note
If the “Administrator Security Level” parameter in Administrator mode
was set to “Level 2”, [Output Setting], and [AE Level Adjustment] also ap-
pear.
[Bin Setting] only appears if the mailbin kit is installed.
“Tray 2” appears for the “Bin Setting” parameter only if the output tray is
installed.
AE Level Adjustment
Display setting
Sub Screen Display ON/OFF
Scan Basic Screen Default Setting
Description Default Setting
Specify the initial value for auto exposure. The higher the setting, the
more that the original background is emphasized.
2 (standard)
Description Default Setting
Sub Screen Display Type
• Setting value:
An image of the selected setting is displayed.
• Job List:
A list of the jobs that are being performed is displayed.
Setting value
Parameter Description
Default Tab Specify settings for scanning. For details, refer to the Network Scan-
ner Operations of the User’s Guide.
Program Default
Address Book Default In-
dex
Address Type Symbol
Display
To Next Page
Loading...
Need help?
General
