Basic copy operations
3
C300 3-37
Basic copy operations Chapter 3
3.7 Specifying a zoom setting
The zoom ratio can be set in order to make a copy on paper with a size dif-
ferent than the original or to enlarge or reduce the size of the copy image.
The following procedure describes how to specify the Zoom setting.
Automatically selecting the zoom ratio (“Auto Zoom” setting)
The most appropriate zoom ratio is automatically selected based on the size
of the loaded original and the specified paper size.
0 The default setting is “×1.0”.
0 The “Auto Zoom” and “Auto Paper Select” settings cannot be selected
together. If the “Auto Paper Select” setting was selected, the Paper
screen appears. In the Paper screen, specify the desired Paper setting.
0 If the “Auto Zoom” setting is selected and an enlargement is to be copied
on paper larger than the document, load the document with the same ori-
entation as the paper.
1 In the Basic screen, touch [Zoom].
The Zoom screen appears.
2 Touch [Auto Zoom].
3 Touch [OK].
The Basic screen appears again.
To Next Page
Loading...
Need help?
General
