Additional copy operations
4
C300 4-35
Additional copy operations Chapter 4
To set the “Auto Reset Notification” function
When the automatic panel reset operation is performed, a message can be
displayed, requesting confirmation to reset the settings in Enlarge Display
mode.
In addition, it is possible to specify when the message is displayed, request-
ing confirmation to reset the settings in Enlarge Display mode.
The factory default setting is “OFF”.
1 Display the Accessibility Setting screen. (To display the screen, refer to
page 4-23)
2 Touch [Auto Reset Notification] or press the [6] key in the keypad.
To Next Page
Loading...
Need help?
General
