3
Basic copy operations
3-66 C300
Basic copy operations Chapter 3
Copying multiple original pages onto a single page (Combine Originals)
If a Combine Originals setting is selected, specify the position of the binding
margin and the loading orientation for the original, otherwise the copies may
not be printed in the desired arrangement.
For details on specifying the position of the binding margin, refer to “Select-
ing the position of the binding margin (Margin settings)” on page 3-24.
For details on specifying the original orientation, refer to “Selecting the orig-
inal orientation (Original Direction settings)” on page 3-22.
1 In the Basic screen, touch [Combine Originals].
The Combine Originals and Original settings screen appears.
2 Select the desired combination of pages.
– Select the page arrangement according to the orientation and
number of pages. If “4 in 1” or “8 in 1” was selected, the page ar-
rangement for “Vertical” and “Horizontal” can be viewed in the sub
display area. However, this appears only if the “Sub Screen Display
Type” parameter in Utility mode is set to [Setting value].
To Next Page
Loading...
Need help?
General
