12
Utility
12-96 C300
Utility Chapter 12
2
Note
If “User Box Admin.” was set to “Allow” and only account track settings
have been specified, “Box Admin” appears at the end of the list of
counters.
To check the counter
1 Display the Administrator Setting screen.
– For details on displaying the Administrator Setting screen, refer to
“Displaying the Administrator Setting screen” on page 12-47.
2 Touch [4 User Authentication/Account Track].
The User Authentication/Account Track screen appears.
3 Touch [3 Account Track Setting].
The Account Track Setting screen appears.
4 Touch [2 Account Track Counter].
5 Touch the button for the desired account.
The Account Track Counter screen for the selected account appears.
6 Touch the button for the counter to be viewed, and then check the
counter.
– To clear the counters for the current account, touch [Clear Counter]
in the Account Track Counter screen for the current account. A
confirmation message appears, asking whether the counter should
be cleared. To clear the counters for the current account, touch
[Yes]. The maximum number allowed is not cleared.
To Next Page
Loading...
Need help?
General
