Basic copy operations
3
C300 3-77
Basic copy operations Chapter 3
To punch holes in copies
1 In the Basic screen, touch [Finishing].
The Finishing screen appears.
2 Touch [2-Hole] or [3-Hole].
– To cancel the Punch setting, touch [2-Hole] or [3-Hole] again to
deselect it.
– To cancel changes to the settings, touch [Cancel].
3 Touch [Position].
– Touch the button for the desired position, and then touch [OK].
– Touch [Auto] to automatically determine the position of the
punched holes according to the orientation of the loaded original. If
To Next Page
Loading...
Need help?
General
