4
Additional copy operations
4-14 C300
Additional copy operations Chapter 4
4.5 Copying with programmed copy settings (Mode
Memory)
To recall a stored job
Programmed copy settings can be recalled to be used again for copying.
1 Position the original to be copied. (For details, refer to page 3-7.)
2 Press the [Mode Memo-
ry] key.
The Recall Copy Pro-
gram screen appears.
3 Touch the button for the copy program registered with the desired
copy settings.
– If the copy settings in the selected copy program are not to be
checked, skip to step 8.
To Next Page
Loading...
Need help?
General
