11
Managing jobs (Job List)
11-2 C300
Managing jobs (Job List) Chapter 11
11 Managing jobs (Job List)
11.1 Overview of the Job List screen
Jobs
Specifying the desired copy settings, then pressing the [Start] key queues
the copy operation in this machine. This queued operation is called a job. In
the same way, operations for making scans and computer printouts are also
queued as jobs.
- Jobs that are being performed and the job log can be checked from the
Job List screen.
- Jobs are printed starting with the one at the top of the Current Jobs list.
- Jobs are numbered in the order that they were programmed and are
queued to be performed (printed).
2
Note
The job number identifies the job; it does not indicate the printing order.
In addition, the job number does not change until the job is deleted.
By using the “Increase Priority” function, the selected job can be moved
to the front of the queue so that it is printed first.
Multi-Job feature
Queued jobs are managed by the machine.
- While one job is being printed, another job can be queued. A total of 251
jobs can be queued.
- The number of jobs possible for each function is listed below. (The values
listed below are for reference and may differ from the actual values de-
pending on other settings.)
– Copy mode: 5
– Interrupt mode: 1
–Scan mode: 5
– TWAIN (Push, Pull): 1
–Printing: 10
– Faxes (Quick transmissions): 1
– Faxes (Memory transmissions): 50
– Faxes (Timer TX): 20
– Received faxes: 100
– Faxes (Polling RX): 1
– Faxes (Polling TX): 1
– Shared: 56
To Next Page
Loading...
Need help?
General
