Utility
12
C300 12-17
Utility Chapter 12
12.3 Specifying user settings
This section describes the main parameters and operations that can be per-
formed after pressing the [Utility/Counter] key, then touching [2 User Set-
ting].
System setting
Language Selection
Measurement Unit Setting
Paper Tray Setting
Description Default Setting
Select the language of the Touch Panel messages. English
Description Default Setting
Select one of the following as the measurement units in which values
are displayed in the touch panel.
mm (Numerical Value), inch (Numerical Value), inch (Fraction)
inch (Fraction)
Parameter Description Default Setting
Auto Tray Select Setting Select the paper trays that are selected
automatically when the Auto Paper Se-
lect setting is performed. In addition,
specify the priority of the paper trays
when the ATS feature is performed.
Tray 2 → Tray 3 → Tray 4
→ Tray 1
Auto Tray Switch ON/
OFF
Select whether or not a paper tray load-
ed with paper of the same size is select-
ed automatically when a paper tray
becomes empty while printing copies.
Restrict
No Matching Paper in
Tray Setting
Select the operation that is performed
when there is no paper of the corre-
sponding size in the specified paper tray.
• Stop Printing (Tray Fixed):
The machine stops operating.
• Switch Trays (Tray Priority):
Whether or not the specified paper
tray contains paper of the corre-
sponding size is determined and, if it
does not, a different paper tray is se-
lected if it contains paper of the corre-
sponding size.
Stop Printing (Tray
Fixed)
Print Lists Select the paper tray used for printing
lists, such as the sales counter and con-
sumables indicators.
Tray 1
To Next Page
Loading...
Need help?
General
