11
Managing jobs (Job List)
11-10 C300
Managing jobs (Job List) Chapter 11
To check the job details
1 In the Basic screen, touch [Job List].
The Job List screen appears.
2 Display the list containing the job whose details are to be checked.
3 Select the job whose details are to be checked, and then touch [Detail].
– If an incorrect job was selected, select a different job or touch the
button for the selected job again to deselect it.
The Check Detail screen appears.
4 After the desired information has been checked, touch [Close] or [Exit]
or press the [Reset] key.
– To return to the screen displayed before [Detail] was touched,
touch [Close].
– To return to the Basic screen, touch [Exit] or press the [Reset] key.
!
Detail
To delete a job, touch [Delete] in the Check Detail screen.
If [Detail] appears in the Check Detail screen for a job selected from the
Scan or Fax TX tab, detailed information is available on the multiple re-
cipients that the data was sent to with broadcast transmission. To view
the information, touch [Detail].
To Next Page
Loading...
Need help?
General
