Utility
12
C300 12-21
Utility Chapter 12
Job List Default
Initial setting
2
Reminder
To change the default settings for Scan mode or Fax mode, press the
[Scan] or [Fax] key, enter Utility mode, and then select a setting for this
parameter.
!
Detail
For details on the default settings and the factory default settings, refer
to “Automatically canceling the settings (automatic panel reset)” on
page 2-30.
Description Default Setting
Select the job list displayed as the default in the Job List screen.
• Current Print Jobs:
The Current Jobs list appears on the Print tab.
• Print Job History:
The Job History list appears on the Print tab.
Current Print Jobs
Description Default Setting
Specify the default settings for Copy mode.
The copy settings selected when the machine is turned on (the pow-
er switch is set to “n”) or the [Reset] key is pressed can be specified.
• Current Setting:
The settings specified from the touch panel before Utility mode
was entered are set as the default settings for Copy mode.
• Factory Default:
The factory default settings are set as the default settings for
Copy mode.
Factory Default
To Next Page
Loading...
Need help?
General
