3
Basic copy operations
3-6 C300
Basic copy operations Chapter 3
The “2 Position” Staple setting is automatically cancelled, and the
“Booklet” function is set.
To select the “2 Position” Staple setting, cancel the “Booklet” function,
and then select the “2 Position” setting.
Operations where the setting specified first is given priority
If a warning message appears, indicating that settings cannot be combined,
those settings cannot be specified together.
The procedure for selecting the “2 Position” Staple setting after setting the
“Booklet” function is described below.
1 Set the “Booklet” function.
2 Select the “2 Position” Staple setting.
The message “This mode is not available with Booklet.” appears and
the “2 Position” Staple setting cannot be selected.
The “Booklet” function remains selected and the “2 Position” Staple
setting is canceled.
To select the “2 Position” Staple setting, cancel the “Booklet” function,
and then select the “2 Position” setting.
To Next Page
Loading...
Need help?
General
