Basic copy operations
3
C300 3-7
Basic copy operations Chapter 3
3.3 Feeding the original
The original can be fed in either of the following two ways. Be sure to position
the original correctly according to the type of original being copied.
To load the original into the ADF
0 For details on the types of originals that can be loaded into the ADF, refer
to “Originals” on page 7-26.
0 Do not load originals that are bound together, for example, with paper
clips or staples.
0 Do not load more than 100 sheets or so many sheets that the top of the
stack is higher than the , mark, otherwise an original misfeed or damage
to the original or machine may occur. However, an original that exceeds
100 pages can be scanned in separate batches. For details, refer to
“Scanning the original in separate batches (“Separate Scan” setting)” on
page 3-11.
0 If the original is not loaded correctly, the original may not be fed in
straight or an original misfeed or damage to the original may occur.
1 Slide the lateral guides
to fit the size of the orig-
inal.
Original Feed Method Features
Using the ADF By using the ADF, a multi-page original can be fed
automatically. This feed method can also be used with
double-sided originals, and is perfect for multi-page double-
sided originals.
Using the original glass The original is placed directly on the original glass, then
scanned. This method is best with books and other originals
that cannot be fed through the ADF.
To Next Page
Loading...
Need help?
General
