Konica Minolta BIZHUB C300 Copy Guide

8
Application functions
8-62 C300
Application functions Chapter 8
8.17 Erasing specified areas of copies (“Erase” function)
Copies can be produced by erasing unwanted areas around the original,
such as the transmission information on received faxes and the shadows of
punched holes.
With frame erasing, the same width can be erased along all four sides of the
original or a different width can be erased along each side of the original.
To copy using the “Erase” function
1 Position the original to be copied.
– For details on positioning the original, refer to “Feeding the original”
on page 3-7.
2 Touch [Application], and then touch [Erase].
– To cancel all settings for the Application functions, touch [Reset].
The Erase screen appears.
A: 0 inch to 2 inch
A
A

Konica Minolta BIZHUB C300 Specifications

General

Brand	Konica Minolta
Model	BIZHUB C300
Category	All in One Printer
Language	English