10
Care of the machine
10-6 C300
Care of the machine Chapter 10
Paper feed roller
% Clean the paper feed
rollers by wiping them
with a soft, dry cloth.
2
Reminder
Never use solvents, such as benzene or thinner, to clean the paper feed
roller.
Electrostatic charger wire
If the electrostatic charger wire is dirty, streaks will appear though the printed
images. If this occurs, follow the procedure described below to clean the
electrostatic charger wire.
1 Open the machine’s front door.
2 Slowly pull out the
charger-cleaning tool as
far as possible. Next,
slowly push in the charg-
er-cleaning tool as much
as possible. Repeat the
above operations three
times.
3 Securely insert each charger-cleaning tool, and then close the front
door.
To Next Page
Loading...
Need help?
General
