Utility
12
C300 12-35
Utility Chapter 12
User Box Setting
Standard Size Setting
2
Note
For details on displaying [Standard Size Setting], contact your technical
representative.
Administrator/machine setting
2
Note
When entering the device name while registering the machine address,
do not use characters that cannot be used by the operating system.
Parameter Description Default Setting
Delete Unused User Box Specify settings for using boxes. For details, refer to the [Box Oper-
ations of the User’s Guide].
Delete Secure Print Doc-
uments
Auto Delete Secure Doc-
ument
Specify settings for using boxes. For details, re-
fer to the [Box Operations of the User’s Guide].
1 day
Parameter Description Default Setting
Original Glass Original
Size Detect
Paper size table 1 or 2 can be selected to
change the available settings when the paper
size is detected. For details, contact your tech-
nical representative.
Table 1
Foolscap Size Setting The Foolscap paper size can be changed. There
are four Foolscap sizes: 220 × 330 mm, 8-1/2 ×
13 w, 8-1/4 × 13 w, 8-1/8 × 13-1/4 w, and 8 ×
13 w. For details, contact your technical repre-
sentative.
8 × 13 w
Parameter Description
Administrator Registra-
tion
Specify the administrator information displayed in the Service/Ad-
ministrator Information screen of the Help screens and the From ad-
dress for sending e-mail from the machine.
Input Machine Address The name of the machine and its e-mail address can be registered.
The registered machine name is added to the names of files that are
sent and to originals saved in boxes. As a default, the machine name
is specified as “KMBT_C300”. The registered e-mail address is used
with Internet faxing.
To Next Page
Loading...
Need help?
General
