12
Utility
12-22 C300
Utility Chapter 12
Copier setting
Parameter Description Default Setting
Auto Paper Select for
Small Original
Select whether copying is permitted
when the “Auto Paper Select” setting is
selected and either no original is placed
on the original glass or the original
placed on the original glass is too small
for its size to be detected.
• Copy on Small Size:
The original size is determined to be
5-1/2 × 8-1/2, and copies are pro-
duced on 5-1/2 × 8-1/2-size paper.
• Copy on Letter:
The original size is determined to be
8-1/2 × 11, and copies are produced
on 8-1/2 × 11-size paper.
• Prohibit Copy:
Copies cannot be produced since the
original size cannot be detected. Be-
fore pressing the [Start] key, the paper
tray (paper to be printed on) must be
selected.
Prohibit Copy
Auto Booklet ON when
Fold & Staple
Select whether or not the “Booklet”
function is selected automatically when
the “Fold & Staple” setting is selected.
This parameter is available only if option-
al saddle stitcher is installed.
Auto Select Booklet
Auto Zoom for Combine/
Booklet
Select whether or not the preset zoom
ratios are automatically selected when
“Auto Paper Select” is set and a Com-
bine Originals or Booklet setting is se-
lected.
• Auto Display Zoom Ratio:
The following zoom ratios are set.
2 in 1, Booklet × 0.647
4 in 1 × 0.500
8 in 1 × 0.323
• OFF:
No zoom ratio is selected automati-
cally.
Auto Display Zoom Ratio
Sort/Group Auto Change Select whether or not the “Sort” setting
is automatically selected when 2 or more
copies are set to be printed in a single
job.
•ON:
When an original is loaded into the
ADF and the [Start] key is pressed, the
“Group” setting is automatically se-
lected if the original consists of only
one page or the “Sort” setting is auto-
matically selected if the original con-
sists of two or more pages.
• OFF:
The “Sort” and “Group” settings are
not selected automatically.
ON
To Next Page
Loading...
Need help?
General
