Specifications
6
C300 6-7
Specifications Chapter 6
Finisher FS-514
Specifications
Finishing trays Finishing tray 1, finishing tray 2
Feed settings “Sort”, “Group”, “Sort”/“Offset”, “Group”/“Offset”, and
“Sort” and Staple
Paper types Finishing tray 1, finishing tray 2:
Normal paper (13-1/4 to 24 lb)
Thick paper (24-1/4 to 68 lb), OHP, postcards, enve-
lopes, label sheets, letterheads
Punch settings: Normal paper (13-1/4 to 55-1/2 lb)
Staple settings: Normal paper (13-1/4 to 24 lb), thick
paper (24-1/4 to 32 lb)*
* “Cover Mode” function: Thick paper (24-1/4 to 55-1/2
lb)
Paper sizes 11 × 17 w, 8-1/2 × 11 w/v, 5-1/2 × 8-1/2 w/v,
12-1/4 × 18 w (A3 Wide w)
Paper capacity Output tray 1:
Normal paper (13-1/4 to 24 lb): 200 sheets
Thick paper (24-1/4 to 68 lb), OHP, postcards, enve-
lopes, or label sheets, letterheads: 20 sheets
Output tray 2:
Normal paper (13-1/4 to 24 lb): 1,000 sheets of 8-1/2 ×
11 w or smaller, or 500 sheets of 8-1/2 × 14 w or larger
Thick paper (24-1/4 to 68 lb), OHP, postcards, enve-
lopes, or label sheets, letterheads: 20 sheets
Amount of shift 1-1/4
Staple settings Paper sizes (no. of bound pages): 11 × 17 w to 8-1/2 ×
11 w/v (2 to 50 sheets)
Punch settings Paper sizes:
2-hole: 11 × 17 w to 8-1/2 × 11 w/v
3-hole: 11 × 17 w, 8-1/2 × 11 v
Number of punched holes: 2, 3
Power requirements Supplied from main unit
Power consumption Less than 66 W
Dimensions 13-3/4 (W) × 18-1/2 (D) × 22-1/2 (H)
When the tray is pulled out: 17-1/4 (W)
Weight 73-1/4 lb
Consumables Staples SK-602 (containing 5,000 staples) × 1
To Next Page
Loading...
Need help?
General
