Basic copy operations
3
C300 3-19
Basic copy operations Chapter 3
3.4 Specifying original settings
The following procedure describes how to specify the type of original to be
copied.
Copying originals of mixed sizes (“Mixed Original” setting)
Originals of different sizes can be loaded together into the ADF to be fed and
scanned one by one automatically.
The possible combinations of original sizes differ depending on the widest
original loaded (position of the lateral guides of the ADF).
0 Do not load more than 100 sheets or so many sheets that the top of the
stack is higher than the , mark, otherwise an original misfeed or damage
to the original or machine may occur. However, an original that exceeds
100 pages can be scanned in separate batches. For details, refer to
“Scanning the original in separate batches (“Separate Scan” setting)” on
page 3-11.
0 If the original is not loaded correctly, the original may not be fed in
straight or an original misfeed or damage to the original may occur.
1 Slide the lateral guides to fit the size of the largest page.
– For details on the original sizes that can be mixed in the ADF, refer
to “Originals that can be loaded into the ADF” on page 7-26.
2 Arrange the original pag-
es so that the side to be
copied (first page) faces
up, as shown in the illus-
tration.
To Next Page
Loading...
Need help?
General
