Basic copy operations
3
C300 3-15
Basic copy operations Chapter 3
Scanning a multi-page original from the original glass
When making double-sided or combined copies using the original glass,
place each page of a multi-page original on the original glass to scan it. The
following procedure describes how to place single-sided original pages on
the original glass to make double-sided copies.
0 Either “Auto Print” or “Batch Print” can be selected as the print setting
when scanning with the “Separate Scan” setting. The default setting is
“Auto Print”. For details on selecting the print setting for scanning with
the “Separate Scan” setting, refer to “Copier setting” on page 12-22.
1 Lift open the original cover, or the ADF if it is installed.
2 Position the first page or the first side of the original face down onto the
original glass.
– For details on positioning the original, refer to “To place the original
on the original glass” on page 3-9.
3 Close the original cover, or the ADF if it is installed.
4 In the Basic screen, touch [Simplex/Duplex].
The Simplex/Duplex screen appears.
When
loaded
in the v
orientation:
When
loaded
in the w
orientation:
20° 20°
To Next Page
Loading...
Need help?
General
