3
Basic copy operations
3-58 C300
Basic copy operations Chapter 3
3.10 Specifying the density settings
The density can be adjusted to print a copy that is darker or lighter than the
current print result.
The following three density adjustments are available.
The following procedures describe how to specify the density settings.
Density Settings Description
Density The density of the print image can be adjusted to one of nine
levels.
Each time [Light] or [Dark] is touched, the density is lightened
or darkened by one level.
Touch [Std.] to select the middle setting of the nine levels.
Background Removal The density of the background color of the original can be
adjusted to one of nine levels.
Each time [Light] or [Dark] is touched, the background density
is lightened or darkened by one level.
Touch [Std.] to select the seventh setting from the “Light” end.
Touch [Auto] to automatically adjust the level of the
background density according to the original being copied.
Glossy Select this setting when printing with a glossy finish.
Text Enhancement Select one of nine settings for the reproduction quality of text
when copying originals consisting of text that overlaps images
such as illustrations or graphs (text with a background).
Each time [Lighter Text] or [Darker Text] is touched, the text
density is lightened or darkened by one level.
To emphasize the text on the background, touch [Darker Text]
to adjust the setting toward +.
To de-emphasize the text on the background, touch [Lighter
Text] to adjust the setting toward –.
Touch [Std.] to select the middle setting of the nine levels.
To Next Page
Loading...
Need help?
General
