Basic copy operations
3
C300 3-11
Basic copy operations Chapter 3
Scanning the original in separate batches (“Separate Scan” setting)
A large original can be divided and scanned in a number of batches.
A maximum of 100 original pages can be loaded into the ADF at one time.
However, by copying with the “Separate Scan” setting, an original that ex-
ceeds 100 pages can be scanned and treated as a single copy job. In addi-
tion, the scanning location can be switched between the original glass and
the ADF during the scanning operation.
0 The loading capacity of the ADF is 100 sheets of normal paper (21-1/4 lb)
or 38 sheets of thick paper (55-3/4 lb).
0 Either “Auto Print” or “Batch Print” can be selected as the print setting
when scanning with the “Separate Scan” setting. The default setting is
“Auto Print”. For details on selecting the print setting for scanning with
the “Separate Scan” setting, refer to “Copier setting” on page 12-22.
1 Position the original to be copied.
– For details on positioning the original, refer to “Feeding the original”
on page 3-7.
2 In the Basic screen, touch [Separate Scan].
– To cancel the “Separate Scan” setting, touch [Separate Scan] again
to deselect it.
To Next Page
Loading...
Need help?
General
