7
Copy paper/originals
7-22 C300
Copy paper/originals Chapter 7
To specify a setting for special paper
If a setting for special paper, such as OHP and other special paper, is select-
ed for a paper tray, that tray is not selected automatically with the “Auto Pa-
per Select” setting or the ATS feature. However, a paper tray set to “Single
Side Only” is given priority when the “Auto Paper Select” setting is specified
or when the paper trays are switched automatically.
The following procedure describes how to specify the setting for oversized
paper loaded into the tray 1.
1 In the Basic screen, touch [Paper].
The Paper screen appears.
2 Touch the button for the tray 1.
– To set the paper size for the bypass tray, touch the button for the
bypass tray.
3 Touch [Change Tray Settings].
To Next Page
Loading...
Need help?
General
