7
Copy paper/originals
7-8 C300
Copy paper/originals Chapter 7
Auto tray switch feature
If the selected paper tray runs out of paper while a job is being printed and a
different paper tray is loaded with paper meeting the following conditions,
the other paper tray is automatically selected so printing can continue. If the
optional LCT is installed, a maximum of 3,400 copies (with 8-1/2 × 11 v pa-
per) can be made continuously. (The paper tray is automatically switched
only if the “Auto Tray Switch ON/OFF” parameter in the Utility mode is set to
“Allow”.)
Operating Conditions
- The paper is the same size.
- The paper is positioned in the same orientation.
- The paper is the same type.
- Paper trays that are selected when the paper tray is automatically
switched.
!
Detail
For details on the specifying the paper trays that are selected when the
paper tray is automatically switched, refer to “System setting” on
page 12-17.
Order for Selecting the Paper trays
As a factory default, when a different paper tray is automatically selected, the
next paper tray in the following list is chosen.
tray 2 → tray 3 → tray 4 → tray 1
!
Detail
To change the order in which the paper trays are selected, refer to “Sys-
tem setting” on page 12-17.
To Next Page
Loading...
Need help?
General
