3
Basic copy operations
3-52 C300
Basic copy operations Chapter 3
To select double-sided copies
0 The default setting is “1→1”.
0 For details on using the original glass to scan multiple original pages, re-
fer to “Scanning a multi-page original from the original glass” on
page 3-15.
1 In the Basic screen, touch [Simplex/Duplex].
The Simplex/Duplex screen appears.
2 Touch [1→2] or [2→2].
– Specify the binding direction and the original direction, otherwise
the copies will not be printed as desired.
– If the binding position for the original is set to “Auto”, the position
of the binding margin is automatically selected. A binding margin
along the long side of the paper is selected if the original length is
11-3/4 inch or less. If the original length is more than 11-3/4 inch, a
binding margin along the short side of the paper is selected.
– If the binding position for the original is set to “Auto”, the binding
margin is set at the top or at the left.
To Next Page
Loading...
Need help?
General
