New Holland LS160 User Manual

SECTION 35 - HYDRAULIC SYSTEM
35-15
PROBLEM POSSIBLE CAUSE CORRECTION
Hydraulic system hot Low oil flow pump Plugged inlet line, clean or replac
e
line
Main control valve linkage or spoo
l
binding or damaged
Check and correct linkage
binding or damaged
Auxiliary boom hydraulic contro
l
not in neutral
Lock handle in neutral when not i
n
use
not in neutral
Hydraulic oil cooler restricted
Leaking cylinder packing
use
Clean oil cooler
Repair cylinders
Leaking cylinder packing
Main system relief valve low
Repair cylinders
Check main system pressure
Main system relief valve low
pressure
Hydraulic attachment being over
Check main system pressure
Back off and let system cool down,
Hydraulic attachment being over
used
Back off and let system cool down,
DO NOT operate at or close t
o
relief pressure
Oil filter indicator light stays on Oil filter clogged
Incomplete circuit
Undersize tubes, hoses, or fittings
Change filter
Check the DkGn/O wire an
d
connections
Replace any undersize tubes,
Undersize tubes, hoses, or fitting
s
Filter base
Replace any undersize tubes
,
hoses, or fittings
Replace if pressure differentia
l
across filter is over 40 PSI

New Holland LS160 Specifications

General

Brand	New Holland
Model	LS160
Category	Mini Skid Steers
Language	English