SECTION 55 - ELECTRICAL SYSTEM
55-44
EIC SETUP MODE
The EIC Setup Mode is made up of several items:
FAULt - Fault/Warning history
• Fault occurrence with hour level of last
occurrence.
Eng 0
0 - Engine Code
• Set EIC to loader engine model.
Unit F
or Unit C - Select Displayed Temperature
Units, Fahrenheit or Celsius
• Temperature displayed in Metric (Celsius) or
English (Fahrenheit).
r-CAL - Adjust Engine RPM
• Calibrate EIC display to external RPM tach
reading.
CLr F - Clear Faults
• Clear Faults to zero.
HourS - Adjust skid-steer loader hours
• Change unit hours when installing a new EIC
board in a loader.
CLr E - Clear Memory
• Return EIC to original factory settings.
• Engine code reset to (01).
• Hours reset to (0000.0) zero.
• Temperature displayed (Fahrenheit).
• Engine RPM calibration cleared.
To Next Page
Loading...
Need help?
General
